|
If you need a gasket using Neoprene rubber or foam let us know. This particular gasket is 0.062" thick Neoprene rubber, 60 duro hardness with PSA on 1 side. This gasket is 3" square and required bolt holes very near to the edge of the part. 
0 Comments
 One of the most common used materials we die cut is Poron and we can produce it in various thicknesses. We manufacture hundreds of gaskets using Poron every week. The gasket shown in the photo is Poron at 0.031" thick with small diameter holes and the center cut out. If you have a gasket project that requires Poron material please contact us.
|
About the AuthorWith over 25 years of experience in the manufacturing industry, Martin Chell brings a wealth of knowledge to his client projects. He has worked with large companies including Qualcomm and completed projects in a variety of aerospace, biotech and other applications.
Archives
January 2019
Categories
All
“The die cut samples look great.” ~ Aquapail “Thanks so much for the great service.” ~ Robert, Hat Fitness “The gaskets worked out just fine. Thanks for your help.” ~ Chong, Redpoint Engineering |
RSS Feed